| Hydraulic Brake Retrofit Kit! | |
  | |
| This Hydraulic Brake retrofit kit, can be used on many homebuilt aircraft with a gross weight of up to 1200 pounds (KR, Sonerai, etc.).
The calipers are a dual sided brake that press against both sides of the disk. They are built to be used with Azusa 5" or 6" wheels or can be adapted to other bolt patterns. The kit will fit: 3/4" or 5/8" standard axles, and we put enough material around the caliper retainer so it can be machined out for a 1" or 1.250" aircraft style axle. | |
| The complete Hydraulic Brake Kit weighs only 5.75 pounds, less the wheels! | |
| The retro-fit kit consists of: 2 discs 2 calipers 2 disc spacers 2 caliper holders. | |
| The set retails for $289.95. |
| Replacement Puck Hydraulic Brakes |
$8.95 each |
| Master Cylinders | |
 | |
| Master Cylinders (can be used as heel or toe brakes). |
$49.95 each |
| Tube & hardware Kit (One kit is required for each side.) |
$12.95 each. |
| Single hand lever to operate master cylinder | $94.95. |
| Dual hand lever to operate master cylinders | $144.95. |
| We can also supply wheels, tires and tubes. | |
| Hydraulic Brake Installations! | |
 |
 |
| 4.5" Machined Brake Drum Fits Azusa 5" and 6" wheels. | |
 |
 |
| These mechanical brakes are only meant for use while taxing, not for stopping while landing. For mechanical brakes you will need two mechanical drums and two mechanical assemblies. | |
| 4.5" Machined Brake Drum Fits Azusa 5" and 6" wheels |
$8.95 each |
| 4.5" Mechanical Brake Assembly w/actuating arm |
$28.75 each |
| Replacement parts for Mechanical brake assembly: | |
| Lined brake shoes | $14.95 pair |
| Brake arm | $1.25 each |
| Spring | $.75 each |
| Cam | $4.75 each |
 |
 |
 |
Questions at 1-402-493-6507
Fax us at 402-493-3846.
Inquiries can also be directed to:
gpasc@earthlink.net
Great Plains Aircraft Supply Co., Inc.
P.O. Box 545
Boys Town, NE 68010
Home Page Here!