SHOPPING CART!

VW ENGINE CASES

Standard Engine Case - MAGNESIUM
	New manufactured engine case as used in all of our 4 cylinder kits. Dual bypass case features 8mm factory installed case savers, oil pick up tube, 6 main through studs and 8mm case studs. Price $725.00 Magnesium Case ONLY
	Suggested additional items that may also be required: Gasket Set, Rear Seal, Dipstick, Engine Case Kit, Nut & Washer Kit, Cam Plug (Steel/Rubber), Dowel Pins, Oil Pump and Cover Plate
	Standard Engine Case $725.00

Super Engine Case - ALUMINUM
	New manufactured engine case as used in all of our 4 cylinder kits. Dual bypass case features 8mm factory installed case savers, oil pick up tube, 6 main through studs and 8mm case studs. Please note this case weighs 14 additional pounds. Price $899.95 ALUMINUM Case.
	Suggested additional items that may also be required: Gasket Set, Rear Seal, Dipstick, Engine Case Kit, Nut & Washer Kit, Cam Plug (Steel/Rubber), Dowel Pins, Oil Pump and Cover Plate
	Super Engine Case - ALUMINUM . . . $899.95

Standard Engine Case with 92mm or 94mm Bore
	New manufactured engine case as used in all of our 4 cylinder kits. Dual by-pass case features 8mm factory installed case savers, oil pick up assemble, 6 main through studs and minor 8mm case studs. This case has been machined for 92mm or 94mm bore! MAGNESIUM CASE. Price of engine case is $725.00, plus $85 for machine work to case.
	Suggested additional items that may also be required: Gasket Set, Rear Seal, Dipstick, Engine Case Kit, Nut & Washer Kit, Cam Plug (Rubber), Dowel Pins, Oil Pump and Cover Plate
Standard Engine Case with 92mm Bore . . . $810.00 MAGNESIUM CASE.	Standard Engine Case with 94mm Bore . . . $810.00 MAGNESIUM CASE.

Super Engine Case for Direct Drive (Pulley End)
	As used in our 2180cc or 2276cc engine kit. Case features same as above, but includes this additional work: welded behind #3 cylinder, machined for 92mm bore, clearanced for 82mm stroke, nose machined for Force One Main Bearing, dowel pin deep drilled.
	Suggested additional items that may also be required: Gasket Set, Rear Seal, Dipstick, Engine Case Kit, Nut & Washer Kit, Cam Plug (Rubber), Dowel Pins, Oil Pump and Cover Plate
	Click here for Installation Instructions!
Super Engine Case for Pulley End $1035.00 92mm Bore MAGNESIUM CASE	Super Engine Case for Direct Drive (Pulley End) $1035.00 94mm Bore MAGNESIUM CASE

Super Engine Case for Reduction or Flywheel Drive
	Case features above, but includes welded behind #3 cylinder, machined for 92mm or 94mm bore, clearanced for 82mm stroke.
	Suggested additional items that may also be required: Gasket Set, Rear Seal, Dipstick, Engine Case Kit, Nut & Washer Kit, Cam Plug (Rubber), Dowel Pins, Oil Pump and Cover Plate
	Click here for Installation Instructions!
Super Engine Case for Reduction/Flywheel Drive $955.00 92mm Bore MAGNESIUM CASE	Super Engine Case for Reduction/Flywheel Drive $955.00 94mm Bore MAGNESIUM CASE

	Great Plains Aircraft Supply Co., Inc. 7011 N 160th Ave Bennington, NE 68007 info@greatplainsas.com
	Orders and Information: 402-493-6507 or Fax 402-493-3846