SHOPPING CART!

VW U-BUILD PUSHROD KIT
PUSHROD TOOL,
& PUSHROD TUBES!

U-BUILD PUSHROD KIT
Our Pushrods are manufactured from 5/16" diameter steel. One end is installed and the other end is cut off to proper length and the end is then installed. A must for any 1835cc to 2180cc engine. NOTE: Anytime you add more than .040" cylinder shims, you will need custom length pushrods!
U-Build Pushrod Kit $64.95	Stock Steel Pushrods $26.95
Click here for Installation Instructions!

PUSHROD TOOL
This tool will correctly measure the length you need to make the pushrods. Anytime you add .040" plus in deck shims, you need to make custom length pushrods.	Pushrod Tool . . . $12.95

PUSHROD TUBES
	These OEM tubes are stainless steel to prevent rust, both inside and out. Sold in sets of 8, 4 or individually.
	EIGHT Pushrod Tubes . . . $22.00
	FOUR Pushrod Tubes . . . $11.00
	ONE Pushrod Tube . . . $2.89

To place an order: Call us at 1-402-493-6507
or Fax us at 402-493-3846
Inquiries can also be directed to: info@greatplainsas.com

Great Plains Aircraft Supply Co., Inc.
7011 N 160th Ave.
Bennington, NE 68007