Type 1 Flywheel DRIVE


2180cc & 2276cc
"
TYPE 1 TYPE 1
ENGINE DISPLACEMENTS 2180 2276
Take off HP, 3600 RPM 76 80
Continuous HP, 3400 RPM 70 73
Bore (mm) 92 94
Stroke (mm) 82 82
Displacement, in CC 2180 2276
Compression Ratio 7.7:1 7.7:1
Minimum Fuel Octane 92 92
Firing Order 1432 1432
Magneto 009 009
Harness Stock Wires Stock Wires
Plugs (with Spark Plug Adapters) 7902 7902
Propeller Drive 1:1 1:1
Carburetor, Float Bowl Various Various
Electric Fuel Pump Opt. Opt.
Starter Geared Geared
Alternator Amp Output 45 45
Prop Flange Diameterr 5" 5"
Bolt Holes in Flange 6 6
Prop Flange Bolt Pattern, o/c 4"4"
Prop Pilot Diameter 2" 2"
Prop Pilot Depth AN5 AN5
Weight in Pounds 158 158.5


The Flywheel Drive weights are for engines with the Flywheel Drive engine kit, starter and alternator packages and the running Kit. Other than wood props may be used on the Flywheel Drive. Octane requirements will vary with compression ratio as will horsepower output. Great Plains engine "are not" certified aircraft engines. They can only be used in homebuilt aircraft that are certified in the "experimental category."



Great Plains Aircraft Supply Co., Inc.
7011 North 160 Avenue
Bennington, NE 68007

info@greatplainsas.com
Orders and Information: 402-493-6507
or Fax 402-493-3846