TYPE 1 Engine Components (Connecting Rod, Bearings)

Rods are used with standard 69mm crankshaft. Rods are sized for center to center length, honed for bearing clearance, honed for wrist pin fit and balanced on both ends. Set of 4.

Always replace all bearing sets when overhauling your engine. Main bearing journal ground .010" undersized for crank.

Always replace all bearing sets when overhauling your engine. Main bearing journal ground .020" undersized for crank.

Always replace all bearing sets when overhauling your engine. Rod bearing journal ground .010 undersized for crank.

Always replace all bearing sets when overhauling your engine. Rod bearing journals ground .020" undersized for crank.

Always replace all bearing sets when overhauling your engine and be sure to replace cam bearings if you are trying a different camshaft.

Used to set end play clearance between .004" and .008". Available in .24mm thickness

Used to set end play clearance between .004" and .008". Available in .30mm thickness.

Used to set end play clearance between .004" and .008". Available in .32mm thickness.

Used to set end play clearance between .004" and .008". Available in .34mm thickness.

Used to set end play clearance between .004" and .008". Available in .36mm thickness.

Used to set end play clearance between .004" and .008". Available in .38mm thickness.